Altnux Electronic Co., Ltd.
Main products:security product,comsumer product,led light
Products
Contact Us
  • Contact Person : Ms. Guo Ada
  • Company Name : Altnux Electronic Co., Ltd.
  • Tel : 86-0755-28891815
  • Fax : 86-755-28891815
  • Address : Guangdong,ShenZhen,Bantian Street Office,Longgang District
  • Country/Region : China
  • Zip : 518000

H.264 Wi-Fi IP Hight Resolution Smoke Detector Color SQ62

H.264 Wi-Fi IP Hight Resolution Smoke Detector Color SQ62
Product Detailed
1/3 Color CCD High Resolution Camera;540 TVL 0.001LUX(SDNR)Slow-shutter;Audio Video Intercom by Wi-Fi/Ehernet

H.264 Wi-Fi IP Hight Resolution Smoke Detector Color Camera

Specification:

  *  1/3 Color CCD Hight Resolution Camera

  *  540 TVL 0.001LUX(SDNR) Slow-shutter

  *  Audio Video Intercom by Wi-Fi/Ethernet

  *  H.264  Algorihm hardware compression

  *  Easy Recording Setup by internet

  *  Functional Smoke Detector Camera

  *  DC 12V 1A

Now you have to namually assigh your computer LAN ip address

To do this ,please right click on my network places icon located on your desktip then click on properites

Now right click local area connection ,then click on properities

Under Local area connection screen in the general tab .click on internet protocol(TCP/IP)the click on properties

On internet protocol(TCP/IP) properties,click on use the following ip address and assign the following address below

Your computer ip address should be :

IP address                192.168.0.200

Subnet mask             255.255.255.0

Default gateway:       192.168.0.1

After completing all of the steps above ,Your're now ready to configure your wifi

First you need to launch your internet eplorer only (not compatible with firefox browser)

Clear out the address bar than type the following ip address in your addre bar(192.168.0.233)

Once you login successfully ,please clickthe network setup on the left off your screen,Now click on wireless nic to configure and input your router information 

On the wireless nic tab

  1. Enter your router ESSID(router name)

  2. Select encrypt (input your security code for your router)

  3. Wep key(input your security key to gain access to the router)

  4. Choose the options(use specific ip)

  5. Input your ip address: xxx.xxx.xxx.xxx

  6. Netmask: xxx.xxx.xxx.xxx

  7. Default gateway: xxx.xxx.xxx.xxx

  8. After filling in your entire router information ,click ok the click on reboot tab to your left

  9. Once your device is rebooted ,please give it 45 seconds before disconnecting the    network cable

H.264 Wi-Fi IP Hight Resolution Smoke Detector Color SQ62



Copyright Notice @ 2008-2012 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.